Multifunctional biocompatible Ni/Ni-P nanospheres for anti-tumor "neoadjuvant phototherapy" combining photothermal therapy and photodynamic therapy.

Gastric cancer, a gastrointestinal tumor with high morbidity and lethality, is often treated using strategies that are not as effective as they could be due to the locally advanced stage. Although pre-operative neoadjuvant chemotherapy can degrade the tumor stage to afford the possibility of surgery, it still possesses the problems of high systemic toxicity and low selectivity. In this work, we constructed an intelligent multi-functional nanoplatform (NNPIP NPs) with synergistic effects of photothermal therapy (PTT) and photodynamic therapy (PDT), which consisted of the nickel/nickel phosphide (Ni/Ni-P) nanosphere as the core, polyethyleneimine (PEI) as the shell, and the loaded indocyanine green (ICG). The mutual reinforcement of heat generated by the core and photosensitizer under 808 nm NIR laser irradiation is highly effective in the synergistic action of PTT. And co-delivery of ICG with nanoparticles into the cell enhances the PDT effect by reducing the consumption of singlet oxygen (1O2). Ultimately, this therapeutic strategy in vivo not only shrunk tumors but even eliminated tumors completely in a quarter of samples, which may be considered as a potential alternative to neoadjuvant chemotherapy and called "neoadjuvant phototherapy". In addition, as a nanoplatform based on transition metal nickel, NNPIP NPs could also be considered as a potential contrast agent for T1-weighted magnetic resonance imaging (MRI). Herein, we can diagnose and achieve pre-surgical downstaging of tumors and hope to improve R0 resection rates with lower toxicity and higher selectivity.

Influence of heavy metals in Parkinson's disease: an overview.

Parkinson's disease (PD) is an ageing disorder with deterioration of dopamine neurons which leads to motor complications like tremor, stiffness, slow movement and postural disturbances. In PD, both genetics as well as environmental factors both play a major role in causing the pathogenesis. Though there are surfeit of risk factors involved in PD occurrence, till now there is lack of an exact causative agent as a risk for PD with confirmative findings. The role of heavy metals reported to be a significant factor in PD pathogenesis. Heavy metal functions in cell maintenance but growing pieces of evidences reported to cause dyshomeostasis with increased PD rate. Metals disturb the molecular processes and results in oxidative stress, DNA damage, mitochondrial dysfunction, and apoptosis. The present review elucidates the role of cobalt, nickel, mercury, chromium, thallium metals in α-synuclein aggregation and its involvement in blood brain barrier flux. Also, the review explains the plausible role of aforementioned metals with a mechanistic approach and therapeutic recommendations in PD.

Virus matrix interference on assessment of virucidal activity of high-touch surfaces designed to prevent hospital-acquired infections.

OBJECTIVES/PURPOSE: High-touch surfaces are a critical reservoir in the spread of nosocomial infections. Although disinfection and infection control protocols are well developed, they lack the ability to passively reduce the pathogenic load of high-touch surfaces. Copper and its alloys have been suggested as a surface that exhibit continuous biocidal effects. Antimicrobial studies on these surfaces are prevalent, while virucidal studies are not as well explored. The goal of this study was to first determine the virucidal activity of a copper-nickel-zinc alloy and to then examine the effect of soiling and virus preparation on virucidal activity. METHODS: A baculovirus vector was used as an easily quantifiable model of an infectious enveloped animal cell virus. Droplets containing virus were deposited on surfaces and allowed to stay wet using humidity control or were dried onto the surface. Virus was then recovered from the surface and assayed for infectivity. To examine how the composition of the droplet affected the survival of the virus, 3 different soiling conditions were tested. The first two were recommended by the United States Environmental Protection Agency and the third consisted of cell debris resulting from virus amplification. RESULTS: A copper-nickel-zinc alloy was shown to have strong virucidal effects for an enveloped virus. Copper, nickel, and zinc ions were all shown to leach from the alloy surface and are the likely cause of virucidal activity by this surface. Virucidal activity was achieved under moderate soiling but lost under high soiling generated by routine virus amplification procedures. The surface was able to repeatably inactivate dried virus droplets under moderate soiling conditions, but unable to do so for virus droplets kept wet using high humidity. CONCLUSION: Ion leaching was associated with virucidal activity in both wet and dried virus conditions. Soiling protected the virus by quenching metal ions, and not by inhibiting leaching. The composition of the solution containing virus plays a critical role in evaluating the virucidal activity of surfaces and surface coatings.

NIR-Driven Intracellular Photocatalytic O2 Evolution on Z-Scheme Ni3S2/Cu1.8S@HA for Hypoxic Tumor Therapy.

Hypoxia in a tumor microenvironment (TME) has inhibited the photodynamic therapy (PDT) efficacy. Here, Ni3S2/Cu1.8S nanoheterostructures were synthesized as a new photosensitizer, which also realizes the intracellular photocatalytic O2 evolution to relieve hypoxia in TME and enhance PDT as well. With the narrow band gap (below 1.5 eV), the near infrared (NIR) (808 nm) can stimulate their separation of the electron-hole. The novel Z-scheme nanoheterostructures, testified by experimental data and density functional theory (DFT) calculation, possess a higher redox ability, endowing the photoexited holes with sufficient potential to oxide H2O into O2, directly. Meanwhile, the photostimulated electrons can capture the dissolved O2 to form a toxic reactive oxygen species (ROS). Moreover, Ni3S2/Cu1.8S nanocomposites also possess the catalase-/peroxidase-like activity to convert the endogenous H2O2 into ·OH and O2, which not only cause chemodynamic therapy (CDT) but also alleviate hypoxia to assist the PDT as well. In addition, owing to the narrow band gap, they possess a high NIR harvest and great photothermal conversion efficiency (49.5%). It is noted that the nanocomposites also exhibit novel biodegradation and can be metabolized and eliminated via feces and urine within 2 weeks. The present single electrons in Ni/Cu ions induce the magnetic resonance imaging (MRI) ability for Ni3S2/Cu1.8S. To make sure that the cancer cells were specifically targeted, hyaluronic acid (HA) was grafted outside and Ni3S2/Cu1.8S@HA integrated photodynamic therapy (PDT), chemodynamic therapy (CDT), and photothermal therapy (PTT) to exhibit the great anticancer efficiency for hypoxic tumor elimination.

Evaluation of the release of nickel and titanium under orthodontic treatment.

The metal alloys used in dentistry are made mainly of nickel (Ni), titanium (Ti), and other elements such as molybdenum (Mo), zirconium (Zr), iron (Fe), tin (Sn), chrome (Cr), carbon (C), copper (Cu) and niobium (Nb) which can release metal ions in unstable environments. The aim of this work was determine the salivary pH before and during orthodontic treatment; evaluate the release of metal ions, mainly Ni and Ti, in urine and saliva using Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES); and evaluate the corrosion using Scanning Electronic Microscopy (SEM). In this study, we selected 35 individuals under orthodontic treatment, from whom saliva and urine samples were collected in 3 stages: (a) basal, (b) at 3 and (c) 6 months after the placement of the fixed appliances. SEM analyzed the Ni-Ti (0.016″) and stainless steel (SS) (0.016 × 0.022″) archs after 1 month of being in contact with the oral cavity. Statistical analysis was performed with Stata using the ANOVA model of repeated measures with a p < 0.05. A statistically significant difference in the concentration of Ni in saliva were found between 3 and 6 months of intervention and Ti in urine was found 3 and 6 months.

Defect-engineered transition metal hydroxide nanosheets realizing tumor-microenvironment-responsive multimodal-imaging-guided NIR-II photothermal therapy.

Exploiting two-dimensional nanomaterials as photo-based theranostic agents is promising for the highly efficient ablation of deep-tissue-buried tumors. However, they are limited by their poor absorption in the second near-infrared-light (NIR-II) bio-window (1000-1300 nm) and intrinsic nonbiodegradability. Herein, defect-rich sulfur-doped Ni(OH)2 (S-Ni(OH)2) nanosheets decorated with bovine serum albumin (BSA) as a novel theranostic agent is developed, which can accomplish multimodal-imaging-guided photothermal ablation of mouse cancers in the NIR-II bio-window. Sulfur doping extends the absorption spectra of Ni(OH)2 nanosheets from the visible to NIR-II bio-window, affording highly efficient photothermal conversion (58.20% for 1064 nm), entailing it to become an excellent contrast agent for photoacoustic imaging. Further, because of their intrinsic paramagnetic property, they can be applied for magnetic resonance imaging. Owing to the abundant defective sites in S-Ni(OH)2 nanosheets, they exhibit response to the tumor microenvironment, resulting in effective biodegradation and excretion from the body. In vivo toxicity experiments indicated that S-Ni(OH)2-BSA NSs delivered no appreciable toxicity and good biocompatibility. This work provides an avenue for the rational design of effective theranostics agents.

Facile synthesis of hollow mesoporous nickel sulfide nanoparticles for highly efficient combinatorial photothermal-chemotherapy of cancer.

Traditional techniques for the synthesis of nickel sulfide (NiS) nanoparticles (NPs) always present drawbacks of morphological irregularity, non-porous structure and poor long-term stability, which are extremely unfavorable for establishing effective therapeutic agents. Here, a category of hollow mesoporous NiS (hm-NiS) NPs with uniform spherical structure and good aqueous dispersity were innovatively developed based on a modified solvothermal reaction technique. Upon the successful synthesis of hm-NiS NPs, dopamine was seeded and in situ polymerized into polydopamine (PDA) on the NP surface, followed by functionalization with thiol-polyethylene glycol (SH-PEG) and encapsulation of the chemotherapeutic drug, doxorubicin (DOX), to form hm-NiS@PDA/PEG/DOX (NiPPD) NPs. The resultant NiPPD NPs exhibited a decent photothermal response and stability, attributed to the optical absorption of the hm-NiS nanocore and PDA layer in the near-infrared (NIR) region. Furthermore, stimulus-responsive drug release was achieved under both acidic pH conditions and NIR laser irradiation, owing to the protonation of -NH2 groups in the DOX molecules and local thermal shock, respectively. Lastly, a strong combinatorial photothermal-chemotherapeutic effect was demonstrated for tumor suppression with minimal systemic toxicity in vivo. Collectively, this state-of-the-art paradigm may provide useful insights to deepen the application of hm-NiS NPs for disease management and precision medicine.

Bioactivity and molecular docking studies of some nickel complexes: New analogues for the treatment of Alzheimer, glaucoma and epileptic diseases.

The interaction of the coordination compounds with biological molecules resulted in the investigation of the drug potential of these molecules. In this study, enzyme inhibition of DSA (1-3) coordination compounds that were previously investigated for their anticancer and antibacterial properties was investigated. Also, DSA (1-3) had Ki values of 635.30 + 152.62, 184.01 + 90.05, and 163.03 ± 60.01 µM against human carbonic anhydrase I, 352.23 ± 143.09, 46.2 ± 15.47, and 54.117 ± 18.80 µM against AChE, 310.64 ± 97.35, 35.54 ± 7.01, and 101.51 ± 15.314 µM against BChE, respectively. The biological activity values of these compounds against enzymes whose name are AChE, BChE, and hCAI were compared. Ellman and Verporte methods were used for the study of these enzymes. Cholinesterase inhibitors, also known as anti-cholinesterase and cholinesterase blocking drugs, are chemicals that prevent the breakdown of the neurotransmitter acetylcholine or butyrylcholine. They may be used as drugs for Alzheimer's and myasthenia gravis. It is a common method for comparing biological activity values of nickel complexes with molecular docking calculations. Nickel complexes were studied against enzymes that are human carbonic anhydrase isozyme I for ID 2CAB (hCA I), butyrylcholinesterase for ID 1P0I (BChE), and acetylcholinesterase for ID 1EEA (AChE), respectively.

Biomechanical Comparison of a New Memory Compression Alloy Plate versus Traditional Titanium Plate for Anterior Cervical Discectomy and Fusion: A Finite Element Analysis.

OBJECTIVE: To compare the biomechanical properties of a new memory compression alloy plate and traditional titanium plate after anterior cervical discectomy and fusion (ACDF). METHODS: A finite element model of the C3-7 segments was developed and validated. The C5-6 disc was removed, and an intervertebral cage made of peek material was implanted. Then, a new memory compression alloy plate composed of Ti-Ni memory alloy and a traditional titanium plate were integrated at the C5-6 segment. All models were subjected to a load of 73.6 N to simulate the head weight and 1 Nm of flexion-extension, lateral bending, and axial rotation. The range of segmental motion (ROM) and stress on the prostheses, adjacent discs, and endplates were analyzed. RESULTS: Compared with intact status, ACDF with the new prothesis and traditional titanium plate reduced the ROM of C5-6 in six directions by 95.2%-100% and increased that of adjacent discs (C4-5 and C6-7) by 4.8%-112.5%. Adjacent disc stress peaks were higher for the traditional titanium plate (0.7-4.2 MPa) than for the new prosthesis (0.6-4.1 MPa). Endplate stress peaks were the highest in ACDF with the new prosthesis (15.6-53.3 MPa), followed by ACDF with traditional titanium plate (5.0-29.4 MPa). Stress peaks were significantly lower for the new prothesis (12.8-52.3 MPa) than for the traditional titanium plate (397.0-666.1 MPa). CONCLUSIONS: The new prosthesis improved the immediate stability of the surgical site and had an elastic modulus that was smaller than that of traditional titanium plate, making it conducive to reducing stress shielding and the impact on the adjacent intervertebral disc.

CuS-NiS2 nanomaterials for MRI guided phototherapy of gastric carcinoma via triggering mitochondria-mediated apoptosis and MLKL/CAPG-mediated necroptosis.

Gastric carcinoma is one of the most lethal malignant tumors. As part of our long-term efforts on seeking effective diagnosis and therapeutic strategies of gastric cancer, we present herein novel ternary copper-based chalcogenide nanoplatform CuS-NiS2 nanomaterials with outstanding photothermal (PT)/photodynamic (PD) property that could effectively suppress human gastric cancer in vitro and in vivo without obvious side effects. We revealed that CuS-NiS2 induced reactive oxygen species (ROS) generation, leading to apoptosis through Bcl-2/Bax pathway of human gastric cancer cells under 808 nm near-infrared (NIR) irradiation. In addition, we also confirmed that the combination of CuS-NiS2 and 808 nm NIR laser treatment triggered necroptosis by regulating the novel pathway MLKL/CAPG of human gastric cancer cells. Moreover, the CuS-NiS2 exhibited excellent contrast enhancement according to magnetic resonance imaging (MRI). Taken together, we reported new ternary copper-based chalcogenide nanomaterials CuS-NiS2, which could be successfully applied for MRI-guided PT/PD therapy of gastric carcinoma through mitochondria-mediated apoptosis and MLKL/CAPG-mediated necroptosis.

Comparación entre los sistemas manual de limas de acero inoxidable y el rotatorio de limas de níquel titanio, en la conformación de conductos radiculares curvos in vitro / Comparison between the manual system of stainless steel files and the rotating system of nickel titanium files in the conformation of curved radicular ducts in vitro

Resumen Introducción: Estudio experimental donde se procuró comparar el efecto del sistema manual y del rotatorio sobre la conformación de conductos curvos. Metodología: Una muestra de 40 raíces mesiales de primeras molares inferiores fue aleatorizada en dos grupos iguales: grupos sistema manual de limas K y sistema rotatorio FGK Race®. Se comparó el radio de la curvatura final vs. el inicial mediante el programa Autocat 2015. Se empleó la prueba t con significancia de 0,05. Resultados: El radio de la curvatura varió de manera significativa, tanto para sistema manual como para el rotatorio FGK Race® (p=0,0001 y p=0,0013, respectivamente). Además, el sistema manual produjo mayor variación en el radio de la curvatura al compararlo con el sistema rotatorio 2,23 mm vs. 1,27 mm respectivamente; p=0,13. Conclusiones: Ambos sistemas produjeron modificación en la conformación de los conductos mesiales; sin embargo, en la comparación entre ambos dichas diferencias no fueron significativas.

Abstract Introduction: An experimental study was carried out to compare the effect of the manual system and the rotary system on the conformation of curved conduits. Methodology: A sample of 40 mesial roots of lower first molars was randomized into two equal groups: group manual system of K-files and group rotary system FGK Race®. The radius of the final curvature vs. the initial curvature was compared using the Autocat 2015 program. The t-test with a significance of 0.05 was used. Results: The curvature radius varied significantly for both the manual system and the rotary FGK Race® (p = 0.0001 and p = 0.0013, respectively). In addition, the manual system produced greater variation in the radius of the curvature when compared to the rotary system 2.23mm vs. 1.27mm respectively; p = 0.13. Conclusion: Both systems produced modification on the conformation of the conduits of the mesial roots; however, in the comparison between both systems said differences were not significant.

Tailoring Surface Hydrophilicity Property for Biomedical 316L and 304 Stainless Steels: A Special Perspective on Studying Osteoconductivity and Biocompatibility.

Stainless steels used as metal implants in the medical field have been attracting intensive attention due to their advantages in mechanical properties, anticorrosion properties, and cost effectiveness. Good osteoconductivity, low toxicity, and low inflammatory reactions are essential to stainless steel implant in vivo. However, there are few cases about the surface modification performed for enhancing the corrosion resistance, and there are few researches on the relationship between the surface properties of stainless steel and osteoconductivity when used as implants. This study employed 316L and 304 stainless steel for surface modification including hydrothermal treatment after acid immersion and anodizing treatment, while the as-polished stainless steel was used as a control group. Anticorrosion properties, protein adsorption properties, osteoconductivity, and anti-inflammation property of these specimens were intensively investigated in vitro and in vivo. It was found that specimen subjected to hydrothermal treatment at 230 °C after immersion in 18 M H2SO4 had the lowest metal ions release, while the anodized specimen had the highest release of Fe and Cr due to corrosion. The protein adsorption amount of the specimens was positively related to the osteoconductivity, suggesting protein adsorption is the prerequisite for good osteoconductivity. The osteoconductivity decreased first and then increased with the increase in water contact angle (WCA) value. The specimen with the surface modified by hydrothermal treatment after acid immersion had the highest protein adsorption amount and the best osteoconductivity due to its superhydrophilicity property. The protein adsorption capacity and osteoconductivity for stainless steel tended to be the same as Ti alloys studied before, indicating the surface hydrophilicity property of the implanted metals was the dominant factor affecting the osteoconductivity. From an anti-inflammation perspective, the specimen with the surface modified by hydrothermal treatment after acid immersion also exhibited the lowest thickness of the fibrous capsule membrane from the in vivo tests, suggesting its advantageous biocompatibility. Thus, this research can provide new insight into the application of austenitic stainless steel for implanted material purposes.

Remote Corticotomy Accelerates Orthodontic Tooth Movement in a Rat Model.

INTRODUCTION: With an increasing demand for orthodontic treatment for adult patients, orthodontic professionals are constantly seeking novel strategies and technologies that can accelerate tooth movement in order to shorten the treatment period. For instance, in recent years, the influences of different surgical techniques on orthodontic tooth movement in the ipsilateral side of surgery were intensively investigated. Here, we attempt to examine if corticotomy could also affect the rate of tooth movement in the contralateral side of the surgery by using a rodent model. MATERIALS AND METHODS: 72 eight-week-old Sprague-Dawley rats were randomly divided into three groups as follows: the Control group (orthodontic treatment devices delivered only, no tooth movement), the orthodontic tooth movement (OTM) group (orthodontic treatment devices delivered and orthodontic treatment performed), and the Corticotomy + OTM group (remote corticotomy performed, orthodontic treatment devices delivered, followed by orthodontic treatment). The surgical procedure was conducted on the right side of the maxilla at the time of appliance placement and a force of 60 g was applied between the maxillary left first molar and maxillary incisors using nickel-titanium springs to stimulate OTM. The OTM distance and speed were tracked at 3, 7, 14, and 28 days post-surgery, followed by histological and immunohistochemical assessments. RESULTS: In comparison with orthodontic treatment only, the contralateral corticotomy significantly accelerated OTM. Furthermore, animals undergoing corticotomy + OTM presented with a greater number of osteoclasts on the compression side, stronger staining of the osteogenic marker on the tension side, and higher expression of an inflammatory marker than the OTM group animals. CONCLUSION: Our current study demonstrates that remote corticotomy effectively accelerates alveolar bone remodeling and OTM. The study enriches our understanding of the regional acceleratory phenomenon (RAP) and offers an alternative strategy for accelerating OTM to shorten the orthodontic treatment period.

Accelerated rates of large-scale mutations in the presence of copper and nickel.

Mutation rate variation has been under intense investigation for decades. Despite these efforts, little is known about the extent to which environmental stressors accelerate mutation rates and influence the genetic load of populations. Moreover, most studies on stressors have focused on unicellular organisms and point mutations rather than large-scale deletions and duplications (copy number variations [CNVs]). We estimated mutation rates in Daphnia pulex exposed to low levels of environmental stressors as well as the effect of selection on de novo mutations. We conducted a mutation accumulation (MA) experiment in which selection was minimized, coupled with an experiment in which a population was propagated under competitive conditions in a benign environment. After an average of 103 generations of MA propagation, we sequenced 60 genomes and found significantly accelerated rates of deletions and duplications in MA lines exposed to ecologically relevant concentrations of metals. Whereas control lines had gene deletion and duplication rates comparable to other multicellular eukaryotes (1.8 × 10-6 per gene per generation), the presence of nickel and copper increased these rates fourfold. The realized mutation rate under selection was reduced to 0.4× that of control MA lines, providing evidence that CNVs contribute to mutational load. Our CNV breakpoint analysis revealed that nonhomologous recombination associated with regions of DNA fragility is the primary source of CNVs, plausibly linking metal-induced DNA strand breaks with higher CNV rates. Our findings suggest that environmental stress, in particular multiple stressors, can have profound effects on large-scale mutation rates and mutational load of multicellular organisms.

Nickel-Titanium Wire as Suture Material: A New Technique for the Fixation of Skin.

PURPOSE: To introduce nickel-titanium wire as suture material for closure of incisions in cleft lip procedures. METHOD: Closure of skin incisions using nickel-titanium wire as suture material, with postoperative follow-up wound evaluation. RESULTS: There was excellent patient satisfaction and good cosmetic outcome. CONCLUSION: Nickel-titanium wire is an excellent alternative for suture closure of cleft lip surgical incisions.

Transcatheter closure of atrial septal defect with atrial septal occluder in a patient with nickel allergy.

Presently described is transcatheter closure of atrial septal defect with atrial septal occluder (ASO) device in a patient with nickel allergy. Patients with metal allergy who will undergo nitinol device implantation should be tested for possible nickel hypersensitivity. ASO device and treatment strategy (percutaneous or surgical) should be selected according to allergy test result.

Paclitaxel loaded magnetic nanocomposites with folate modified chitosan/carboxymethyl surface; a vehicle for imaging and targeted drug delivery.

In this study, Paclitaxel (PTX) containing, bovine serum albumin (BSA) nanoparticles were fabricated via a simple approach. Folic acid (FA) was conjugated to chitosan (CS)/carboxymethyl cellulose (CMC) through an esterification reaction to produce BSA-CS-FA or BSA-CMC-FA conjugates. NiFe2O4 noncore (NFs) and PTX were loaded through a heat treatment and by a diffusion process. NFs-BSA-CS and NFs-BSA-CMC-FA with size of about 80nm, showed superior transversal R2 relaxation rate of 349 (mM)-1s-1 along with folate receptor-targeted and magnetically directed functions. NFs-BSA-CS-FA or NFs-BSA-CS-FA were found stable and biocompatible. Application of an external magnetic field effectively enhanced the PTX release from PTX-NFs-BSA-CS-FA or PTX-NFs-BSA-CS-FA and hence tumor inhibition rate. This study validate that NFs-BSA-CS-FA or NFs-BSA-CMC-FA and PTX-NFs-BSA-CS-FA or PTX-NFs-BSA-CS-FA are suitable systems for tumor diagnosis and therapy.

Adjunctive Steps for Disinfection of the Mandibular Molar Root Canal System: A Correlative Bacteriologic, Micro-Computed Tomography, and Cryopulverization Approach.

INTRODUCTION: This study evaluated the disinfecting ability of chemomechanical preparation with rotary nickel-titanium instruments, followed by 2 distinct adjunctive procedures in the root canals of extracted mandibular molars by means of a correlative analytical approach. METHODS: Twenty-two extracted mandibular molars were selected and anatomically matched between groups on the basis of micro-computed tomographic analysis. In the first phase of the experiment, root canals were contaminated with Enterococcus faecalis and subjected to chemomechanical preparation with BT RaCe instruments and 2.5% NaOCl irrigation. Then either XP-Endo Finisher instrument or passive ultrasonic irrigation was used to supplement disinfection. Micro-computed tomography was used to show whether the percentage of unprepared areas correlated to bacterial counts. In the second phase, the same teeth were contaminated once again, and the adjunctive procedures were used. Samples from the isthmus area of mesial roots and the apical 5-mm fragment of distal roots were obtained by cryopulverization. Samples taken before and after treatment steps in both phases were evaluated by quantitative polymerase chain reaction and statistically analyzed. RESULTS: In phase 1, preparation in both groups resulted in substantial decrease of bacterial counts (P < .001). The adjunctive approaches led to a further small bacterial reduction, which was significant for XP-Endo Finisher (P < .05). No significant differences were observed between groups for persisting bacterial counts. Correlative analysis revealed no statistically significant relationship between bacterial reduction and the percentage of unprepared areas (P > .05). In phase 2, both methods had significant antibacterial effects in the main canal, but none of them could predictably disinfect the isthmus/recess areas. CONCLUSIONS: Both XP-Endo Finisher and passive ultrasonic irrigation exhibited antibacterial effectiveness, but only the former caused a significant reduction in the bacterial counts after chemomechanical preparation. None of them were effective in predictably disinfecting the isthmus/recess areas.

[The use of Foley catheter in reconstructive procedures involving the middle third of the facial skeleton].

The aim of this study was to improve the efficiency of surgical treatment of patients with fractures involving zygomatico-orbital complex and maxillary sinus through the use of Foley catheter. 352 patients with fractures of the middle third of the facial skeleton were treated at the Departments of Oral & Maxillofacial Surgery in Novokuznetsk Institute and I.M. Sechenov First MSMU. All patients underwent open reduction and osteosynthesis using extramedullary titanium mini-plates and NiTi mini-clamps. In the cases with large bone defects additional reconstructive techniques were used such as replantation of bone fragments and endoprosthesis with NiTi implants. For the purpose of drainage and retention Foley catheter was placed in the cavity of the maxillary sinus after the surgical procedure. We obtained good and satisfactory results in the majority of clinical cases. The use of Foley catheter was found to be very effective for the post-operative drainage and hemostasis of the maxillary sinus and in cases involving the use of fixation implant in the reconstructive surgeries in the middle third of the face.